Alpine ALMaxOGM USER GUIDE

Loading ...

7(800) 470-4201 | www.alpineairtec.com

TROUBLESHOOTING

If the fan does not spin or you do not hear a buzzing sound from the ozone while

machine is suppose to be on, check these 4 simple diagnostic steps:

1. Unit is plugged in properly and turned on.

2. Wall outlet is working.

3. Ozone module is installed and is clean and dry.

4. Fuse is installed properly and in good condition (to replace fuse, remove the fuse

holder, take out the spare fuse, remove old fuse, and replace with spare).

Fuse is 2 amp (5mm X 20mm).

PLEASE CONTACT US IF YOU STILL HAVE ANY ISSUE OR QUESTIONS ABOUT YOUR OZONE

GENERATOR.

MAINTENANCE

RE-ORDER OF OZONE MODULE

For re-order, it is suggested that the ozone plate be replaced about every 2 years or as

needed depending on usage. If you no longer smell the ozone or notice char marks on

the ozone plate, it is time to replace the ozone module.

The ozone plate is dierent on each model of the machine. You can purchase the ozone

plate on the www.alpineairtec.com and select your model.

For maintenance, it is suggested that the ozone plate be wiped down every 3-6 months

depending on usage.

Loading ...

Alpine Air ALMaxOGM Commercial Ozone Generator