Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/83533559-13953973srt/bg14.png)
INSTALLATION STEP 9
Electrical Requirements
To avoid installation difficulties, do not run the
opener at this time.
To reduce the risk of electric shock, your garage door
opener has a grounding type plug with athird
grounding pin. This plug will only fit into a grounding
type outlet. If the plug doesn't fit into the outlet you
have, contact a qualified electrician to install the
proper outlet.
If permanent wiring is required by your local
code, refer to the following procedure.
To make a permanent connection through the 7/8"
hole in the top of the motor unit:
• Remove the motor unit cover screws and set the
cover aside,
• Remove the attached 3-prong cord.
• Connect the black (line) wire to the screw on the
brass terminal; the white (neutral) wire to the
screw on the silver terminal; and the ground wire
to the green ground screw. The opener must be
grounded.
• Reinstallthe cover.
TopreventpossibleSERIOUSINJURYor DEATHfrom
electrocutionor fire:
• Besurepoweris notconnectedtothe opener,and
disconnectpowerto circuit BEFOREremovingcoverto
establishpermanentwiring connection.
• Garagedoor installationandwiring MUSTbe in
compliancewith all localelectricaland buildingcodes.
• NEVERuseanextensioncord, 2-wireadapter,or
changeplug in anywayto makeitfit outlet. Besure
theopeneris grounded.
PERMANENT WIRING
CONNECTION
Ground Tab
Green
Ground Screw
White /
2O
Loading ...
Loading ...
Loading ...