Loading ...
Loading ...
Loading ...
24
USEFUL INFORMATION
ERROR CODES
When some malfunctions occur, the appliance will display error codes to warn you:
CLEANING AND MAINTENANCE
The filter prevents remnants of food or other objects from getting inside the
pump. The residues may block the filter, in this case they must be removed.
NOTE
For the best performance of the dishwasher, the filters should be cleaned at least
once a week and have the residues removed that may clog the filters.
The filter system consists of a coarse filter, a flat
(main filter) and a micro filter.
1. MAIN FILTER
Food and soil particles are trapped in this filter are
pulverised by a special jet on the lower spray arm
and washed down into the drain.
2. COARSE FILTER
Larger items, such as pieces of bones or glass that
could block the drain are trapped in the coarse
filter. To remove the items caught, gently squeeze
the tap on the top of this filter and lift it out.
3. FINE FILTER
This filter holds soil and food residues in the sump
area and prevents it from being redeposited on
the dishes during a cycle.
CODES MEANINGS CAUSES
The Rapid Light will Flicker Longer inlet time
Tap is not open enough, or water
intake is restricted.
The Rapid and 90min light flicker
Not reaching the
setting temperature
Malfunction in the heating element.
The glass light is flickering Overflow Some element of dishwasher leaks.
WARNING
• If the dishwasher overflows, make sure to turn off the main water supply
before making a service call.
• If there is water in the base, be sure to remove it before restarting
the dishwasher.
Loading ...
Loading ...
Loading ...