Loading ...
Loading ...
WHAT'S NEW UNDER THE LID?
Your new washer will operate differently than your past agitator-style washer.
Lid,ock l,i
Lid
-,_i l|
Lockea TOallow for higher spin speeds, the lid will lock and the
Lid Locked light will turn on, When this light is lit, the lid is
locked and cannot be opened, When this light is blinking,
the washer is paused. When this light is off, the lid can
be opened. If you need to open the lid to add a garment
after this point, you must press START/Pause/Unlock Lid
and wait for the lid to unlock. The lid will only unlock after
washer movement has stopped. Depending on when in
the cycle you try to pause, it may take several seconds to
several minutes for the lid to unlock.
Sounds
At different stages of the wash cycle, you may
hear sounds and pauses that are different from those
of your previous washer. For example, you may hear a
clicking and hum at the beginning of the cycle as the lid
lock goes through a self-test. There will be different kinds
of humming and whirring sounds as the agitator tests for
load balance or moves the load. And, sometimes,
you may hear nothing at all as the washer allows time for
clothes to soak.
©
Sensing
This washer will perform a series of spins to check
for load balance. When a load is started, it may take 2-3
minutes before water begins to enter the basket. During
this time, a series of clicks and a whirring noise signal
that sensing technology is determining if there is an
off-balance load.
,t.:6
Spray Rinse
Select cycles default to a spray rinse. During these cycles,
you will hear water enter the washer as the tub spins,
allowing the rinse water to penetrate clothes. Check the
"Cycle Guide" for details.
IMPORTANT:
• After the washer basket fills to the selected water level, the lid must be closed before the wash cycle can start.
If filling stops with the lid open, close lid and press START button.
• Fabric Softener option must be selected to ensure fabric softener dispenses at the correct time.
NOTE: Fabric Softener dispenser not available on all models.
SPECIFICATIONS
These units are sold in multiple regions with different
requirements for measuring capacity. Below are a few
of the valid forms of measure posted on this product:
Dry Linen Capacity: A weight measure that reflects
a maximum load size that can be leaded into the dryer.
SASO Capacity: A capacity measure that represents the
capacity at which performance testing was completed.
SASO Water Consumption: Water consumption which the
manufacturer declares will be used in a specific cycle.
Dry Linen Capacity
10,5 kg (23 Ib)
[ SASO Capacity
6,5 kg (14,3 Ib)
SASO Water Consumption
160 litres
Inlet Valve Water Pressure Specifications
Max inlet water pressure Min inlet water pressure
861,845 Pa 68,948 Pa
Loading ...
Loading ...
Loading ...