Loading ...
Loading ...
Loading ...
Combustible Rear Walls
Since this range can be used continuously, please take note of the IMPORTANT INSTRUCTIONS.
Where the rear wall is constructed of combustible materials (such as all-timber or stud wall partitions and batoned
plasterboard) these will require special wall heat protection measures.
Non-combustible insulation board as a protective cladding can be used behind the range of at least
5
/8” (15mm) thick, such
as Monolux or equivalent. This should be taken up to hotplate level. See Fig. 9A.
The
3
/16” (5mm) air gap must be left open and NOT blocked off across the top edge. See Fig. 9B.
Fig. 9A DESN 517231 DESN 517232Fig. 9B
SPECIAL NOTE: Ensure that unprotected electric cabling or plastic services do not pass within or on the outside of the
wall behind or directly above the cooker. This type of material can age prematurely when exposed to continuous higher
temperature.
Other Clearances
A minimum clearance of 39
5
/8” (1000mm) must be available at the front of the range to enable it to be serviced.
11
COMBUSTIBLE WALL FITTING USING FIRE
RESISTANT BOARD
COMBUSTIBLE WALL FITTING CLEARANCE
Loading ...
Loading ...
Loading ...