Loading ...
Loading ...
Loading ...
WashingDetergent
7
Washing
Preparation:
● Check if the washing machine is properly installed. (P. 12)
● Turn on the water faucet.
● When using Temp Setting, turn on both hot and cold water faucets.
1
After loading laundry
Turn the power on.
● The Cotton program is selected when the
power is turned on.
2
Select a program. (P. 5)
■
Temp Setting
■
Timer preset
3
Start.
The pulsator moves without
water and measures the
amount of laundry
(approx. 5 seconds).
Water amount indication
(approx. 5 seconds)
Remaining time indication
● To check the water amount
→Press “Water Level”.
4
According to the water amount indication
Put in detergent.
● Approx. 20 seconds after the water amount
is displayed, water supply begins.
5
Close the lid.
Operation ends with beeps.
Set how many hours later to fi nish
operation. (P. 4)
● 2 minutes after start-up, all indications except
turn off.
● To confi rm after the timer has been set, press
.
● To cancel or change, press .
● The hours that can be set differ depending on
the program.
When the Fragrance program is selected
The buzzer sounds before the fi nal rinse and
operation is paused. Put the desired amount
of softener which has been diluted with water
directly into the tub.
5 beeps
● The Fragrance program cannot be selected
when Child Lock (P. 10) is set.
● Operation will resume if the lid is left closed for
more than 1 hour.
■
After pressing “Start”
● You can change the water level until the end of
the wash process.
● You can change each of the “Wash”, “Rinse”
and “Spin” operation contents until the end of
the wash process. Press “Pause” beforehand.
● You cannot change the program.
Press to select Hot/Warm/Cold for
washing. (P. 4)
Hot ← Warm ← Cold
2
3
Timer preset
Temp setting
1
OM_NA-F95A1,F85A1.indd 7OM_NA-F95A1,F85A1.indd 7 10/20/2560 BE 10:47 AM10/20/2560 BE 10:47 AM
Loading ...
Loading ...
Loading ...