Loading ...
Loading ...
Loading ...
REFRIGERATOR USE
In order to ensure proper temperatures, you need to permit
airflow between the refrigerator and freezer sections. As shown in
the illustration, cool air from the refrigerator enters through the
bottom of the freezer section and moves up. Most of the air then
flows through the freezer section vents and recirculates under the
freezer floor. The rest of the air enters the refrigerator section
through the top vent and flows down the back of the refrigerator
compartment. This air is then evenly distributed throughout the
refrigerator compartment through the eight vents.
Do not block any of these vents with food packages. If the vents
are blocked, airflow will be prevented and temperature and
moisture problems may occur.
IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To prevent
odor transfer and drying out of food, wrap or cover foods tightly.
IMPORTANT:
• The Refrigerator control adjusts the refrigerator compartment
temperature. The Freezer control adjusts the freezer
compartment temperature.
• Wait 24 hours after you turn on the refrigerator before you put
food into it. If you add food before the refrigerator has cooled
completely, your food may spoil. Adjusting the Refrigerator
and Freezer controls to a lower (colder) setting will not cool
the compartments any faster.
• If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked, before adjusting the controls.
• The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.
Digital Controls
For your convenience, your controls are preset at the factory.
When installing your refrigerator, make sure that the controls are
still preset to the "set points" as shown.
IMPORTANT:
• The display in the power on mode indicates the freezer and
refrigerator set points.
To Turn the Refrigerator Power On/Off and View Set
Points:
• Press and hold ON/OFF for 2 seconds to turn on/off the
digital control panel and the refrigerator cooling.
IMPORTANT: Pressing the power on/off button, while in the
power on mode, turns off the display and product cooling.
NOTE: If the freezer set point is below zero, the indicator light
next to the freezer display will light up.
Cow FREEZER REFRIGERATOR CoW
COLDER COLDER
To View the Celsius Set Points:
• Press the °C SELECT touch pad. The indicator will light up.
Adjusting Digital Controls _
DTo Adjust Set Point Temperatures:
• Press the refrigerator or freezer up or down arrow until the
desired temperature is reached.
NOTE: Wait at least 24 hours between adjustments and then
recheck the temperatures before other adjustments are
made.
REFRIBERATOR COrn
COLDER
• The set point range for the freezer is -5°F to 5°F (-21°C to
-15°C) and 33°F to 45°F (1 °C to 7°C) for the refrigerator.
CONDITION/REASON: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR
- Not set correctly for your Control 1° higher
conditions
REFRIGERATOR too warm REFRIGERATOR
- High use or room very warm Control 1° lower
FREEZER too cold FREEZER Control 1°
- Not set correctly for your higher
conditions
FREEZER too warm/too little ice FREEZER Control 1°
- High use or heavy ice use lower
• The factory recommended set points are 0°F (-18°C) for the
freezer and 37°F (3°C) for the refrigerator.
11
Loading ...
Loading ...
Loading ...