Loading ...
Loading ...
Loading ...
Setting the Temperature Control
Cool Down Period
* For safe food storage, allow four hours for the freezer to
cool down completely. The freezer will run continuously
for the first several hours. Foods that are already frozen
may be placed in the freezer after the first few hours of
operation. Unfrozen foods should NOT be loaded into
the freezer until the freezer has operated for four hours.
* When loading the freezer, freeze only three pounds of
fresh food per cubic foot of freezer space at one time.
Distribute packages to be frozen evenly throughout the
freezer. It is not necessary to turn the control knob to a
colder setting while freezing food.
Temperature Control
Electromechanlcal Temperature
Control (Chest and Some
Upright Models)
The electromechanical
temperature control is located
inside the freezer on upright
models, and on the left exterior
wall on chest models (see figure
1). The temperature is factory
preset to provide satisfactory food
Electromechanical Control
Figure 1
storage temperatures. However, the temperature control
is adjustable to provide a range of temperatures for your
personal satisfaction. To adjust the temperature setting,
turn the temperature control knob
clockwise or counterclockwise.
Allow several hours for the
temperature to stabilize between
adjustments.
Standard Electronic Temperature
Control (Some Upright Frost
Free Models)
The standard electronic
temperature control is located
outside the freezer (see Figure
2). Temperature is factory preset
to provide satisfactory food
storage temperatures. To adjust
the temperature setting, press
the UP (A) symbol for colder
temperatures and DOWN (V)
symbol for warmer temperatures
on the control panel. Allow several
hours for the temperature to
stabilize between adjustments.
Standard Electronic
Temperature Control
Figure 2
Hi Temp
DoorAjar
7is Coldest
0 is OFF
Alarm
Reset
"%_z)To_.Oo+
To turn off freezer, press DOWN (V) symbol until display
shows "0" To activate freezer, press UP (A) until display
shows "4" or desired setting.
To keep the temperature setting from being accidentally
changed, the control may be locked. This is done by
pressing "Alarm Reset" for 3 seconds. "L" will then appear
on display. To unlock the control, press "Alarm Reset" for 3
seconds. For the first second, "U" will appear, and then the
current temperature will appear.
Deluxe Electronic Temperature Control (Some Upright
Frost Free Models)
Refer to the Electronics Control Guide supplied when you
purchase a deluxe electronic upright model. See Figure 3
for deluxe electronics control panel.
Door Ajar ;; Power Loss
H01dFor F/C
_i;¸¸¸¸¸Temp
Display
J
Upright Models
Figure 3
Loading ...
Loading ...
Loading ...