Loading ...
Loading ...
Loading ...
22
Troubleshooting
Poor wash results may not always be caused by the dishwasher. Please review the following Troubleshooting Charts for possible
remedies. You may nd the proper solution without having to call a service provider.
Problem Possible Cause and/or Remedy
Dishwasher does not start Is the machine plugged in?
Are all fuses operative?
Is the water supply fully turned on?
Is the dishwasher door closed securely?
Have you pressed the On/O button?
Dishwasher starts but fails
to circulate water within 5
seconds
Cancel the program by pressing the Start/Pause
button for 5 seconds.
What if the “S:an” is not
displayed on the screen?
Dishwasher cycle was interrupted or the water did not reach required temperature.
Door will not stay down in
open position
Adjust door spring tension (custom panel models only, see Installation Guide).
Dishes are not dry Improper loading:
Load the dishwasher as suggested in this manual.
Insu cient rinse agent supply:
Increase the dosage amount of rinse agent and/or re ll the rinse agent dispenser.
Dishes are removed too soon:
Do not empty your dishwasher immediately after washing. Open the door slightly so that the
steam can escape. Begin with unloading the dishwasher when the dishes are only hand warm.
Empty the lower rack rst. This prevents water from dripping o dishes in the upper rack.
Wrong program selection:
In short period programs, the wash temperature and therefore the cleaning performance is
lower. Choose a program with a longer washing time.
Washing cutlery with worn surface:
Evaporation of water is more di cult with these items.
Cutlery or dishes of this type are not suited for dishwashers.
Tea, co ee, or
other stains
Wrong program selection:
Select a program that washes at a higher temperature
or takes a longer amount of time.
Detergent is moist or clumping in box:
Bleaches in cleaners lose their e ciency when stored
under unfavorable conditions. Store detergents in a
dry location. Close the lid of the container securely.
Using cutlery with a low surface quality:
Cleaning of these items is made di cult by their poor
surface structure. Cutlery or dishes of this type are not for dishwashers.
Dishes break Improper loading.
Load the dishwasher as suggested in this manual.
Overloaded racks.
Do not overload the dish rack. Dishes may hit against each other and break.
Loading ...
Loading ...
Loading ...