AcuRite 00829 Weather Forecast Station

User Manual - Page 9

For 00829.

PDF File Manual, 14 pages, Read Online | Download pdf file

00829 photo
Loading ...
Loading ...
Loading ...
9
To manually clear all of today’s HIGH recorded values, press and hold the
” button for 2 seconds. Dashes display to conrm you have cleared the
HIGH records.
Troubleshooting
No outdoor sensor
reception
no bars
If the wireless signal indicator shows no bars:
Relocate the display unit and/or the outdoor sensor.
The units must be within 330 ft (100 m) of each other.
Make sure both units are placed at least 3 feet (.9
m) away from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).
Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to 20 minutes for display unit and sensor
to synchronize after batteries are replaced.
Outdoor
temperature
is ashing or
showing dashes
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. Bring both the sensor and display unit indoors and
remove at least one battery from each.
2. Make sure the A-B-C switch on both units match.
3. Reinstall the battery in the outdoor sensor.
4. Reinstall the battery in the display unit.
5. Let the units sit within a couple feet of each other
for about 20 minutes to gain a strong connection.
Inaccurate forecast
Weather Forecast icon predicts conditions for the next
12 to 24 hours, not current conditions.
Has Learning Mode icon disappeared from the
display unit? Learning Mode must complete before
forecast and pressure will be accurate.
Allow unit to run continuously for 33 days. Battery
removal or resetting the display unit will restart
Learning Mode. After 14 days, forecast should be
fairly accurate, however Learning Mode calibrates for
a total of 33 days.
Inaccurate
temperature
or humidity
Make sure both the display unit and sensor are
placed out of direct sunlight and away from any heat
sources or vents (see page 7).
• Make sure both units are positioned away from
moisture sources (see page 7).
Loading ...
Loading ...
Loading ...