Loading ...
Loading ...
Loading ...
PROBLEM
Dishes not dry
Spotting and
filming
CAUSED BY
•Water is not hot
•AIR DRY option
selected
. Improper loading
•Rinse agent
dispenser empty
• Hard water
• Water is not hot
oAIR DRY option
selected
• Not enough or
poor quality
detergent
.Old detergent
• No rinse agent
SOLUTION
• Raise water heater thermostat to 140°F if
necessary.
. Do not select AIR DRY option_ Allow dishes
to dry in heated air,,
• Load dishes so items drain properly. Avoid
overloading.
.Fill rinse agent dispenser if empty.
• Fill detergent cups to capacityr Use dishwasher
detergent with highest available phosphorous
content. May be necessary to install a water
softener.
• Raise water heater thermostat to 140°E
• Drying without heat may cause some
spotting. Do not select AIR DRY option_
oUse more fresh automatic dishwasher
detergent, Use detergent with highest
available phosphorous content,
especially if you have hard water.
• Use only fresh, automatic dishwasher
detergent, Store tightly closed in a cool, dry
place. Discard old, lumpy or separated
detergent. Do not fill detergent dispenser
until ready to wash,
• Fill rinse agent dispenser,,
To remove stubborn spots and film from
glassware:
1. Remove all metal utensils from the
dishwasher.
2o Do not add detergent.
3. Select POTS PANS cycle.
4, Start the dishwasher and allow to run for
18 to 20 minutes° The dishwasher will
now be in the main wash.
5, Then open the door and pour 2 cups
(500 ml) white vinegar into bottom of
dishwasher,.
6. Close the door and allow to complete
the cycle°
If vinegar rinse doesn't work" Repeat as
above, except use 1/4 cup (60 mt) of citric
acid crystals instead of vinegar. (Most
drugstores carry citric acid crystals..)
17
Loading ...
Loading ...
Loading ...