Loading ...
Loading ...
Loading ...
Installation Instructions
REVERSING THE DOOR SWING (CONT.)
[] TRANSFER DOOR STOPS
On each do()); remove the metnl door stop./_)se the
center hinge pin as a guide to align the door stop,
supplied inside the kit, on the opposite side, after
reversing the handles.
On ti'eezer drawer models, only tile refiigerator door
has a door stop.
[] PREPARE FREEZER HANDLE
FOR DOOR SWING CHANGE (For
freezer swing door models only)
One of the illustrations below will look like your
freezer door hmldle.
Remove tile timr handle motmting screws. Remove
the I)lug button and I)lug button retniner and transfer
them to the opposite side, Reinstall handle,
Plug.buttonf
retainer
Handle
[rlountlng
screws
Remoxe tile )luo button and transfer it to tile
opposite side.
Plugbutton--
NOTE: Make sm'e tile door stop on tile bottom of the
door has been transferred to the left side of the door
as explained in step 6.
[]
TRANSFER REFRIGERATOR
DOOR HANDLE TO THE RIGHT
Remove tile fore" handle mortaring screws. On some
models, you IlltlSt tirst i'elllOve the screw covers.
Using a i)ut_ ' knife, remove the four screw hole i_lug
buttons fi'oln tile fight side of tile dora:
Reinstall the i)lug buttons on the left side of the door
_Mign the handle over the holes in the fight side (ff
the door and install the lore" mo/mting screws and
screw covei_ (on some models).
At the top of the dora; remove the plug button using
a i)utt} ' knife and reinstall it in tile top fight hand
side hole.
One of the illustrations below will look like your
refrigerator door hmldle.
Handle ?
moooting"tf,
screws _ r Refri_rator
Handle i_4lr_ door Plugbutton
Handle
mounting
screws'_
Handle
NOTE: Make sure tile door stop on tile bottom of
the door has been transferred to the left side of the
door as explained in step 6.
2O
Loading ...
Loading ...
Loading ...