1
English
First Start
Open the charging case lid and take out both earbuds, then remove the
insulating film and put them back.
1. When the charging case has power, open the lid of the charging case, the
two earphones will turn on and enter the pairing mode. For the main
earphone, the red and white lights will flash alternately ; for the secondary
earphone, the white light will keep on.
2. Activate the Bluetooth on your device and choose "SOUNDPEATS H2" to
connect.
SOUNDPEATS H2
Connected
2
Reset
Wearing
English
1. Clear the pairing data from your device.
2. Place back both earbuds, make sure they are
in charging.
3. Press and hold for 10 seconds until the red and
white lights of both earbuds flash twice
alternately, reset complete.
1. Identify the le and right earbuds.
2. Rotate earbuds and find the most comfortable position.
English
3
Product Diagram
1.5s 3x 2x 1x 1.5s 2s2s 3x2x1x
English
Control
4
Power On
Power Off
Play / Pause
Volume -
Volume +
Previous Track
Next Track
Answer / Hang Up Phone
Call
Reject Phone Call
Switch Between Two Calls
Manually Enter Pairing
Mode
Activate Voice Assistant
Enter / Exit Game Mode
Auto: Open up the case lid
Manually: Press and hold the MFB for 1.5s
Auto: Place back into charging case and close the lid
Manually: Press and hold the MFB for 10s
Double tap the MFB
Single tap the le MFB
Single tap the right MFB
Press and hold le MFB for 1.5s
Press and hold right MFB for 1.5s
Double tap the MFB
Press and hold the MFB for 1.5s
Press and hold the MFB for 2s
Press and hold the MFB for 6s
Triple tap the right MFB
Triple tap the le MFB
Battery Le
0%-33%
34%-66%
67%-99%
100%
Indicator Flash (From Le -Right)
First one white light flashes
First one white light is on, second light flashes
First two white lights are on, third light flashes
All three lights are on
5
Q&A
English
1. Use a Type-C adapter to charge the case (current no more than 1A), when
indicators flash, that means in charging.
2. Please charge the earbuds and charging case at least once per 3 months
when not in use for a long time.
Q2: How to charge the charging case?
Q1: What does the indicator on the charging case tell?
6
1. The charging case has no remaining power. Placing the earbuds back into
the charging case can't make themselves turn off if the case battery is dead.
2. Please make sure the earbuds are correctly placed in the charging case, and
make sure the charging metal sheet and the PIN pin are clean. Please try to
clean the contactors between the charging case and the earphone with
something like microfiber cloth.
Q3: Why are the earbuds still connected to my phone after placing them back
and closing the case lid?
A single charge will not support continuous use for 20 hours. The earbuds work
5 hours for a single charge, and the charging case provides extra 3 recharges.
Q4: Why is the playtime not same as described?
English
English
7
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifcations not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC Statement
IC ID
- English: "
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference thatmay cause undesired operation of
the device."
- French:"
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement."
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
