Loading ...
Loading ...
Loading ...
6. Set cook power for second stage
(optional).
If you want to cook at full (100%) cook power, go to
Step 7.
Example for 60% cook power:
Touch COOK POWER five times.
YOU SEE
7. Repeat Steps 4 through 6 above for
third stage (optional).
8. Start oven by touching START/ENTER.
One tone will sound between stages.
YOU SEE
(display counts down
cooking time in each stage,
starting with the first stage)
NOTES:
• During multi-stage cooking, you may use ADD
MINUTE to increase any stage's cooking time.
When the stage you want to change is active,
touch ADD MINUTE.
• During the last stage, you may also touch
COOKA BIT MORE to increase cooking time.
COOKA BIT MORE increases the last stage's
remaining cooking time by adding a percentage
of the last stage's expired cooking time.
• If the last stage is MICRO TIME, you may use
COOKA BIT MORE after cooking. Within a
minute after cooking, open the oven door to
check for aloneness. Then close the oven door
and touch COOK A BIT MORE. The food will
cook for a percentage of the last stage's cook
time using the last stage's cook power level.
• You may set up WARM HOLD to follow
multi-stage cooking, and you may use COOK A
BIT MORE with WARM HOLD. However,
WARM HOLD uses low cook power and lasts
up to 99 minutes.
When cooking time ends:
Four tones will sound.
YOU SEE
9. After cooking, open the door.
OR
Touch OFF/CANCEL.
Four tones will repeat every minute until you open
the oven door or touch OFF/CANCEL This will
clear the display.
Your microwave oven automatically reheats food. You
do not have to enter times or temperatures.
NOTE: If you want to manually reheat using a cook
time and cook power see "MICRO TIME chart" in the
"Cooking Guide" section.
Reheat code chart
Preset times are based on all foods, except bread
slices, being at refrigerator temperatures.
CODE PAD FOOD SETTING QUANTITY
1 Dinner Plate 1-2 servings
4
5
Cheese Dip 1-3 cups
Soups 1-4 cups
6 Sauce 1-3 cups
7 Pizza 1-2 servings
Summary of steps when setting
REHEAT:
1. Touch REHEAT.
2. Touch REHEAT to scan and choose food settings.
3. Touch 0 QUANTITY to scan and choose quantity
settings.
NOTE: You may also use Number pads (or Code
pads) to choose food settings or quantity settings.
1. Put food in oven and close door.
15
Loading ...
Loading ...
Loading ...