Loading ...
Loading ...
Loading ...
6
OPERATING
INSTRUCTIONS
The batteries in your Cordless Rechargeable
Mini Chopper have not been fully charged.
Before the first use, the batteries must be
charged until all 3 blue battery indicator lights
illuminate. Your mini chopper will be fully
charged in approximately 2 hours. Depending on
your ingredients, your mini chopper will run for
approximately 20 minutes.
NOTE: 95% charged for a lithium-ion battery is
considered fully charged.
1. This mini chopper is for cordless use only and
must only be used on a dry, level work
surface.
2. Place the work bowl with handle to your right
and turn clockwise.
3. Carefully lift and place the blade over the
work-bowl centre stem until it drops to the
bottom. Firmly push to ensure the blade locks
into position.
4. Add desired ingredients to work bowl. Ensure
you cut food into even small pieces and the
work bowl is not overloaded.
5. Lock the lid with the small tab to the left of
the work-bowl handle and turn anticlockwise
(toward the handle) to secure lid.
6.
Press Grind or Chop and pulse or process to your
desired consistency. Food will stop processing
when Chop or Grind button is released.
7. When the blade has stopped moving, remove
cover, work bowl and blade;
a. Turn work bowl cover clockwise to remove.
b. Turn work bowl clockwise to unlock it and
lift off the base.
c.
Carefully remove the blade by holding the
top of the stem of the blade and gently
pulling. NEVER TOUCH THE BLADE ITSELF.
8. To remove liquids and sauces from bowl,
simply pour ingredients out of work bowl or
remove with a scratch-free spatula.
NOTE: Never operate the mini chopper without
the ingredients in the work bowl.
CLEANING &
MAINTENANCE
• Before first use and after every use, clean
each part thoroughly.
• When not in use, recharge and leave
unplugged ready for the next use.
• Periodically check all parts before reassembly.
• To simplify cleaning, rinse the work bowl,
cover, and blade immediately after use so
food will not dry on them.
• All parts except the housing base are
dishwasher safe and recommend washing
them in the dishwasher on the top rack only.
Due to intense water heat, washing the work
bowl and cover on the bottom rack may
cause damage over time. Insert the cover
right side up to ensure proper cleaning and
the work bowl upside down for drainage. Put
the blade in the cutlery basket and remember
when unloading, to CAREFULLY remove the
blade and avoid contact with the blade.
• If you wash the blade by hand, handle the
plastic stem only. Avoid leaving it in sudsy
water where they may disappear from sight.
Fill the work bowl with soapy water, hold the
blade by its stem and move it rapidly up and
down on the center shaft of the bowl. Use of
a spray attachment is also effective. If
necessary, use a nonabrasive brush..
• The housing base may, be wiped clean with
a non-abrasive cloth or sponge. Be sure to
dry it thoroughly.
• If the feet leave spots, wipe the area with a damp
sponge and nonabrasive cleaning detergent.
• To help keep excess cord off the benchtop,
w
rap the cord underneath the motor base in the
hidden storage.
• Any other
servicing should be performed by
an authorised service representative.
Battery Capacity Indicator
70%-95%
First & second lights are
solid & third light is flashing.
40%-70%
First light is solid & second
light is flashing.
< 40%
First light is flashing & others
are off.
Loading ...