Loading ...
Loading ...
Loading ...
aus Troubleshooting
52
Fault Cause Troubleshooting
Detergent residue is present
in the detergent dispenser
or the tablet collecting tray.
Detergent dispenser was
damp when detergent was
added.
▶
Only add detergent to a detergent
dispenser when dry.
Excessive formation of foam
occurs.
Hand washing-up liquid is
present in dispenser for
rinse aid.
▶
Immediately add rinse aid to the
dispenser.
→"Adding rinse aid", Page28
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or appliance care
product used causes excess-
ive foaming.
▶
Change the brand of detergent.
Home Connect problem
Fault Cause Troubleshooting
Connection to home net-
work is not established.
WLAN on router is not act-
ive.
▶
Check the wireless network con-
nection of your router.
WLAN display is flashing. Connection to home net-
work is not available.
▶
Activate the wireless network con-
nection on your router.
Home Connect cannot be
implemented correctly.
Home Connect set incor-
rectly.
▶
Please consult the documents sup-
plied for HomeConnect.
Technical fault is present.
▶
Please consult the information
about support in the documents
supplied for HomeConnect.
Information on display panel
Fault Cause Troubleshooting
Refill indicator for rinse aid
lights up.
Insufficient rinse aid. 1. Add "Rinse aid" →Page28.
2. Set the amount of rinse aid to be
dispensed.
→"Setting the amount of rinse aid",
Page29
Refill indicator for rinse aid
does not light up.
Rinse aid system is switched
off.
▶
Set the amount of rinse aid to be
dispensed.
Malfunctions
Fault Cause Troubleshooting
Water is left in the appliance
at the end of the pro-
gramme.
Filter system or area under
the filters is blocked.
1. Clean the "Filters" →Page41.
2. Clean the "Wastewater pump"
→Page55.
Loading ...
Loading ...
Loading ...