Loading ...
Loading ...
Loading ...
Operating Instructions
(continued)
TO CHANGE TEMPERATURE SETTING:
remote
sensing
tamp/timer
auto
hi [] fittermed
Zo reset
V ON=OFF A FAN SPEED
DO THIS;
PRESS A TO RAISE
PRESSV TO LOWER
steep
YOU WILL SEE:
remote
sensing
tamp/timer
c |
auto
hi [] fitter
med
Zo reset
V ON=OFF A FAN SPEED sleep
Note: Tap or hold either up ( A ) or down ( V ) button until
the desired temperature is seen on the display. This tempe-
rature will be automatically maintained anywhere between
16 °C (60 °F) and 32 °C (90 °F). If you want the display to
read the actual room temperature. See "To Operate on Fan
Only" section on Page 7.
TO AD3UST FAN SPEEDS:
remote
sensing
ternp/timer
c
v ON-OFF A
auto
hi [] fitter
reed
Zo reset
FAN SPEED steep
\
DO THIS;
YOU WILL SEE:
remote
sensing
tamp/timer
auto !
medhi / fitter
lo , reset
V ON-OFF A FAN SPEED steep
PRESSTO SELECT
TO USE AUTO FAN FEATURE:
remote
sensing
temp/dmer
auto
reed
lo []
fitter
reset
V ON-OFF A FAN SPEED
-\
DO THIS;
steep
PRESSFAN BUTTON,
CHOOSE AUTO
YOU WILL SEE:
remote
sensing
temp/timer
auto [] I
medhi / fitter
Zo reset
V 0N=0FF A FAN SPEED sleep
Note: Fan starts at High Speed and adjusts to a slower
speeds the room temperature dictates. For example, if the
room doesn't get too warm, it will stay at the slowest speed.
If the room temperature rises quickly, such as a door being
opened, it will automatically go to the highest speed. The fan
speeds will re-adjust back to the slowest speed as the room
returns to the original set temperature. Press either the fan
slower or fan faster button to adjust the fan speed manually.
@2009 Electrolux Home Products, Inc. All rights reserved.
Loading ...
Loading ...
Loading ...