This unit should be installed by a qualified professional in accordance with all national, state, provincial
and local electrical & plumbing codes.
Tools you’ll need:
Quick Guide
for 14kW Water Heaters
Screwdrivers
Voltage tester Pliers Wire strippers
If you do not have the correct infrastructure you will need a professional to install a new outlet,
breaker, and/or wiring.
Under no circumstances should you attempt to clean, install, inspect, repair, disassemble or
otherwise service this water heater without first shutting off all power to the unit directly at the circuit
breaker box. Serious bodily injury or death could occur if you ignore this warning.
1. Turn off the Power
2. Take each wire pair and connect them to one breaker (see wiring diagram). Make sure that each
breaker is connected with one black wire and one red wire.
3. Using a suitable wire gauge that meets all applicable electrical codes for the size of the breakers used,
run the correct sets of wire from the main breaker panel to the tankless water heater.
4. A separate ground conductor is required.
5. Double-check the electrical connections to make sure they are correct and that all wire connections
are tight and secure.
Confirm that your breaker panel can meet the required specifications
for your unit.
14k: 240V Outlet, 1x 60A Double Pole Circuit Breaker,
1x 6AWG/2 Wire
240V not 120V
HIGH VOLTAGE DANGEROUS
6 AWG Wire
L1: Neutral wire (black)
L2: Live wire (red)
