Loading ...
Loading ...
Loading ...
16
Driving precautions. Responsible and safe driving is your primary responsibility when
driving a vehicle. Always obey local laws and regulations.
Seizures, blackouts, eye strain and discomfort. This device may display flashing
images or loud sounds.
Medical devices. This device may interfere with pacemakers and other medical
devices. If you use an implantable pacemaker, defibrillator, or other medical device,
please consult your healthcare provider and device manufacturer before using this
mobile device. If you use a pacemaker or defibrillator, the FCC recommends that you
pay attention to the following precautions:
Always keep this mobile device at least 20 cm (8 inches) away from the pacemaker
or defibrillator. Please use the mobile device on the side away from the pacemaker or
defibrillator to minimize the possibility of interference.
When you suspect that interference is being caused, the mobile device should be
turned o immediately.
Extreme heat or cold. Don’t use your device in temperatures below 0°C or above
40°C. Don’t store/transport your device in temperatures below -20°C or above 60°C.
Operational warnings. Obey all posted signs when using devices in public areas.
Potentially explosive areas: potentially explosive areas are often, but not always,
posted and can include blasting areas, fueling stations, fueling areas (such as below
decks on boats), fuel or chemical transfer or storage facilities or areas where the air
contains chemicals or particles, such as grain dust or metal powders.
Turn o your device before entering such an area and do not charge batteries. In such
areas, sparks can occur and cause an explosion or fire.
Hospitals. Switch o your wireless device when requested to do so in hospitals, clinics
or health care facilities. These requests are designed to prevent possible interference
with sensitive medical equipment.
Aircraft. Switch o your wireless device whenever you are instructed to do so by
airport or airline sta.
Consult the airline sta about the use of wireless devices on board the aircraft, if your
device oers a ‘flight mode’ this must be enabled prior to boarding an aircraft.
During use, the actual SAR values for your device are usually well below the
values stated. This is because, for purposes of system eciency and to minimize
interference on the network, the operating power of the device is automatically
decreased when full power is not needed for the data connection. The lower the
power output of the device, the lower its SAR value. If you are interested in further
reducing your RF exposure then you can easily do so by limiting your usage or
simply using a hands-free kit to keep the device away from the head and body.
Loading ...