Faber BREV368SS600 Installation Instructions Use and Care Information

Loading ...

RECIRCULATION INSTRUCTIONS -

ONLY FOR BREVA30 AND BREVA36

For recirculating installations, Charcoal Filters are necessary. Remove all grease

filters and set aside. Attach one charcoal filter to each end of the Motor. Each

charcoal filter attaches to the grid on the side of the Motor. Rotate the filter

clockwise to install and counterclockwise to remove (FIGURE 3C). Replace all

grease filters.

There are 2 ways to recirculate the hood:

1) Use the Ductless Recirculating Kit (sold separately), refer to installation in-

structions inside the Recirculating Kit which includes charcoal filters.

DUCTGRT304 or # DUCTGRT364

2) Duct work must be installed to exhaust the rangehood back into the kitchen,

either at the top of the cabinet (FIGURE 3A) or at the face or side of the soffit

(FIGURE 3B). Install at least 15" of metal duct (fig.3A and 3B) at the air exit. Run

the duct vertically and secure it at the opening cut out at the top or side of the

cabinet or soffit. Installation of metal grill is recommended. This duct work must

not terminate into a dead air space. #

FILTER6 must be purchased to complete

this type of installation.

Note: It is recommended that

professional style cooking always

be vented to the outside; for

recirculating Installations, some

duct work is required to exhaust

the unit out of the cabinet.

Loading ...

Faber BREV368SS600 36 Inch Under Cabinet Range Hood with 5-Speed, Digital LED Controls, LED Lighting, Dishwasher Safe Baffle Filters, Pro Motor and VariDuct System