Loading ...
Loading ...
Loading ...
8
Surface Burner Flame Adjustment
1. Turn the top burner knob to any location within the low/simmer setting.
2. Insert a narrow, fl athead screwdriver into the hollow shaft of the surface burner valve, and engage the slotted fl ame
adjustment screw. The fl ame should be a small fl ame that comes just to the top edge of the burner. Rotate the
adjusting screw clockwise no more than 5 turns to lower the fl ame or counter clockwise to increase the fl ame. Turning
the adjusting screw more than 5 turns can result in the screw being completely removed and causing a gas leak. Turn
the burner off and relight several times, turning to any location within the low/simmer position. The fl ame should light
at every port each time. Readjust as needed.
Flathead screwdriverSurface burner valve
(behind control knob)
Flame adjustment
screw
Loading ...
Loading ...
Loading ...