Loading ...
Loading ...
Loading ...
2.Replacing Refrigerator Door
• Right Door
• Lower the door onto the middle hinge pin (9). Make sure the door is aligned with the cabinet.
• Replace the top hinge (7) installing hinge screws (6) to secure it.
" Make sure the gasket on the door is flush against the cabinet and is not folded. Support the door on the handle side while
securing hinge. Make sure the door is straight and the gap between the doors is even.
• Install the ground screw (8) and connect the wire harness (4).
=Connect the door switch wire (2).
• Tighten the cover screws (1).
• Left Door
- Lower the door onto the middle hinge pin (8). Make sure the door is aligned with the cabinet.
• Replace the top hinge (7) installing hinge screws (6) to secure it.
• Make sure the gasket on the door is flush against the cabinet and is not folded. Support the door on the handle side while
tightening. And make sure the door is straight and the gap between the doors is even.
Insert the water supply tube (4) into the connector tube until you see only one scale mark.
(Fully insert the tube over 5/8" (15mm)).
• Connect the wire harness (5).
" Connect the door switch wire (2).
Tighten the cover screws (1).
"_. Disassembly : • Assembly :
Collet
1.Pull out tube while pressing
collets and disassemble it.
1. Insert tube until you can see only one line.
2. After inserting, pull out tube to check if it's properly inserted.
Insert Line_
_ Connecting tube color
• Blue to Blue
t_ • White to White
,.. _ J j
Correct
\ Incorrect
12
Loading ...
Loading ...
Loading ...