Loading ...
Loading ...
Loading ...
33
1-13/16”
(4.6 cm)
1-1/2” x 3/4”
(3.8 cm) x ( 1.9 cm)
wood strip
1
5/16”
Nut driver
2
5/16”
Nut driver
VWH/CVWH only! Measure down 1-13/16 (4.6 cm) from
desired height of hood and secure 1-1/2” x 3/4” wood
strip (provided locally) to wall using screws provided.
VWH/CVWH only! Use additional mounting screws to
secure hood to wood strip.
3
5/16”
Nut driver
5/16”
Nut
Driper
CAUTION: Secure vent hood to wall using screws
provided. Use additional mounting screws and wall
anchors, if necessary.
CAUTION: If not using a duct cover, using screws
provided, make sure top mounting screws are secured
into soffit or cabinet framing use additional mounting
screws, if necessary.
1
2
1
3
4
1
2
z
5
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Slide filter front over front lip. Push filter rear up, then
slide back over rear lip.
Installation
(VWH/CVWH 18”H. Wall & VCWH Chimney Wall Hoods) *For VCWH hoods, begin with Step
3. The VCWH hoods do not require the wood strip
Loading ...
Loading ...
Loading ...