Frigidaire FGF368CXASA gas range

User Manual - Page 18

For FGF368CXASA.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
General Cleaning
The door is heavy. For
safe, temporary storage, lay the door
flat with the inside of the door facing
down.
To Remove and Replace Oven Door
To Remove Oven Door:
1. Open the door.
2. Remove screws located on the inside of the oven door near the hinges A
(one on each side.)
3. Close the door to the quarter-open position. Graspthe door firmly on both
sides and lift up and off the hinges.
4. To clean oven door, follow the instructions provided in the cleaning chart
under General Cleaning
Lift door straight off 2 door hinges
Pull up with finger
Left Glide
Push down with finger
Figure 1
Figure 2
To Replace Oven Door:
1. Besurethehingearmsarein thequarter-open position. Becareful if pulling
the hinges open by hand. The hinges maysnap back against the oven frame
and could pinch fingers.
2. Hold the door at the sides near the top. Insert the hinge arms into slots at
the bottom of the door.
3. Hinge arms must go into the range slots evenly. The hinge arms should be
inserted into the bottom corners of the door as far as they can go.
4. Ifthedoorisnotinlinewiththeovenframe, removeitandrepeattheabove
steps.
To Remove and Replace Warmer Drawer (if equipped)
To Remove Warmer Drawer:
1. _ Turn power off before removing the warmer drawer.
2. Open the drawer to the fully opened position.
3. Locate glide lever on each side of drawer, pull up on the left glide lever and
push down on the right glide lever (see figure 1).
5. Pull the drawer away from the range.
To
1.
2.
3.
Replace Warmer Drawer:
Pull the bearing glides to the front of the chassis glide (see figure 2).
Align the glide on each side of the drawer with the glide slots on the range.
Push the drawer into the range until levers "click" (approximately 2"). Pull
the drawer open again to seat bearing glides into position. If you do not
hear the levers "click" or the bearing glides do not feel seated remove
the drawer and repeat steps 1 thru 3. Thiswill minimize possibledamage
to the bearing glides.
Electrical Shock Hazard can occur and result in
serious injury or death. Disconnect appliance from electric
power before cleaning and servicing the warmer drawer.
18
Loading ...
Loading ...
Loading ...