Loading ...
Loading ...
Loading ...
15. See the inset drawing. Attach the Military
Press Arm (84) to the Pivot Arm (101) with
two 5/16" x 2 1/4" Bolts (33) and two 5/16"
Nylon Locknuts (3).
Press two 1 1/2" Square Inner Caps (32) into
the Military Press Arm (84). Press two 1"
• Round Inner Caps (49) into the Military Press
Arm. Slide two 5" Plastic Handgdps (83) onto
the Military Press Arm.
Attach the Pivot Arm (101) to the Assist
Upright (74) with a 3/8" x 3 1/4" Bott (67) and
a 3/8" Nylon Locknut (21).
16. Press two 1" x 2" Inner Caps (107) into the
Assist Arm (105).
Attach the Assist Arm (105) to the Leg Press
Upright (56) with a 3/8" x 6" Bolt (106), two
3/8" Flat Washers (9), and a 3/8" Nylon
Locknut (21). See the inset drawing, The
Assist Arm must be attached to the lowest
hole In the Ls9 P_ess Upright (5_). T?I_
Assist Arm must also be below the welded
bracket on the Assist Upright (74).
15
16
9
• . 32
67 . _--56
Bracket
/,
105
""74 56"_
i
_"" ./56
,, lil i,000i
10
Loading ...
Loading ...
Loading ...