Loading ...
Loading ...
Loading ...
23
Instructions
ENEN
• This appliance is fitted with a Class
1M white LED light according to
standard EN 60825-1: 1994 +
A1:2002 + A2:2001; maximum
optical power emitted@439nm:
7μW. Do not look at the light
directly using optical instruments
(binoculars, magnifying glass
etc.).
Risk of damaging the appliance
• Do not use abrasive or corrosive
detergents (e.g. scouring
powders, stain removers and
metallic sponges) on glass parts.
Use wooden or plastic utensils.
• Do not use rough or abrasive
materials or sharp metal scrapers.
• Do not use cleaning products
containing chlorine, ammonia or
bleach on parts made of steel or
that have metallic surface finishes
(e.g. anodizing, nickel- or
chromium-plating).
• Do not use steam jets to clean the
appliance.
• Do not spray any spray products
near the appliance.
• Do not obstruct ventilation
openings and heat dispersal slots.
• Do not use the handle to lift or
move the appliance.
Installation and maintenance
• Before performing any work on
the appliance, switch off the
power supply.
• THIS APPLIANCE MUST NOT BE
INSTALLED IN BOATS OR
CARAVANS
.
• Position the appliance with the aid
of a second person.
• Installation and servicing should
be carried out by qualified
personnel in accordance with
current standards.
• Have the electrical connection
performed by authorised technical
personnel.
• The appliance must be connected
to earth in compliance with
electrical system safety standards.
• The minimum distance between
the lower surface of the hood and
the hob must be 750 mm for gas
appliances and 650 mm for
electric appliances.
• The air that is extracted must not
be conveyed into a duct that is
used for extracting fumes from
appliances powered by gas or
other fuels.
• Connect the air outlet from the hood
to fume extraction ducts that have an
adequate internal diameter, not less
than 120 mm.
Loading ...
Loading ...
Loading ...