Loading ...
Loading ...
ADJ Products, LLC - www.adj.com - Ikon IR User Manual Page 4
Ikon IR Operation
Introduction: The ADJ Ikon IR is a rotating gobo projector. This fixture
is designed for mobile DJ’s, clubs, bands, roller rinks and any arena
that requires a compact, light weight, easy to use unit. This fixture is
also suitable for theaters, studios, retail stores, and other similar loca-
tions.
Power Supply: The ADJ Ikon IR contains a automatic voltage switch,
which will auto sense the voltage when it is plugged into the power
source. With this switch there is no need to worry about the correct
power voltage, this unit can be plugged in anywhere.
Operation: This fixture is designed to operate as a stand alone, rotat-
ing gobo projector, there is no need of a DMX controller. It has been
tested and there is no assembly necessary. The Ikon IR is ready to
be plugged in out of the box. When this fixture is plugged in, the unit
will project the included gobo. Using the bottom knob located at the
back of the unit, you can make the control the gobo rotation speed
and rotation direction. The top knob will let you control output inten-
sity.
After plugging in the unit and there is no LED output check the fuse.
If the fuse has not popped, please contact customer support for fur-
ther instructions. This fixture features a light weight case design and
an adjustable hanging bracket.
ADJ Products, LLC - www.adj.com - Ikon IR User Manual Page 5
The UC IR infrared remote gives you control of various functions (See
below). To control the fixture you must aim the remote at the front of
the fixture and be no more than 30 feet away.
The Ikon IR comes with the Airstream IR remote transmitter. The
transmitter plugs into the headphone jack of your iOS phone or
tablet. To control your IR fixture you must raise the volume to the
maximum on your iOS phone or table and aim the transmitter at the
front of the fixture and be no more than 15 feet away. After you have
purchased the Airstream IR transmitters, the app is a free download
from the app store for your iOS phone or tablet. The app comes with
3 pages of control depending on the IR fixture you are using. Please
see below for IR functions including the corresponding app page.
Works with App page 1.
STAND BY - Pressing this button will blackout the fixture.
FULL ON - This button is invalid for this fixture.
FADE/GOBO - Press this button to activate rotation.
“DIMMER +” and “DIMMER -” - Use these buttons to adjust the out-
put intensity.
1-9 - After pressing the FADE/GOBO button, these buttons will allow
you to select rotation direction and rotation speed. Press buttons 1-4
to select clockwise rotation and speed #1 button being the slowest
and #4 the fastest. Press buttons 6-9 to select counter-clockwise
rotation and speed #6 button being the slowest and #9 the fastest.
Press the #5 button to stop rotation.
SOUND ON & OFF - These button’s are invalid for this fixture.
SHOW - This button is invalid for this fixture.
Ikon IR ADJ UC IR Control
The Ikon IR comes with a replaceable gobo. This gobo can be inter-
changed at any time and allows you to customize your system.
To replace gobo;
1. Unscrew the two screws located at the bottom that secure the
gobo housing.
2. Remove the gobo housing.
3. Once the gobo housing has been removed, remove the retaining
ring that holds the gobo in. This can easily be done using needle
nose pliers.
4. Remove and replace the gobo with your desired replacement.
Reinsert the retainer ring, and make sure the ring rests firmly
against the gobo.
5. Slide the gobo assembly back into place, and secure the housing
with two screws.
Ikon IR Gobo Replacement
Loading ...
Loading ...
Loading ...