Loading ...
Loading ...
Loading ...
Door Removal and Reversal Instructions
Joor_p Handb
Hingle BoSom
Scraw Celder
tdlnga
Tools NecessQry:
Phillis" heOd _%
Quadr_x i_aa Adjustable
Wrench
Awl
Screws _t Cove_T°PHinge
Cabinet Hole
Rugs
Hinge Hole
Plug
Top Hinge
Handle Hole
Plug
Door
Screw_ _ Step
Washer
Hinge
R_
Center
Hinge
Hinge Hole
Rug Handle
Hole
DoorStop Door
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
NOTE: The direction in which your refrigerator doors open (door swing}
can be reversed, from left to right or right to left, by moving the door
qinges from one side to the other. Reversing the door swing should be
3erformed by a qualified person.
IMPORTANT: Before you begin, turn the refrigerator temperature control
to "O"and remove the electrical power cord from the wall outlet. Remove
any food from door shelves.
1. Remove toe grille and top r_lnge cover.
2. Remove top hinge with 3/8" hex driver and lift freezer door off of
center hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrencn and save for
reassembly. Ensure plastic washer stays on hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and
oosenlng two outside screws enough to allow hinge and shim to
slide out. Tignten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove
nside screw and install center hinge.
7. Remove bottom hinge with 3/8" hex driver. Reinsert two outside
screws in holes and tighten. Inside screw will go to opposite side
n step 8.
8. Remove two outside screws on opposite side of refrigerator and
nstall bottom hinge. Insert and tighten screw saved from step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin
to other hole in hinge and tighten with adjustable wrench.
10. Reverse door handles _see instructions on nex! page).
11 Move freezer and refrigerator door stops to opposite side. Before
starting screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw center
hinge penthrough center hinge into top of door. Close refrigerator
door to help align hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center hinge pro.
16. Close freezer door. Have an assistant lift up on opposite side of
door while tightening screws to install top hinge.
17. Replace toe grille and top hinge cover.
18. Plug in electrical power cord and tum refrigerator temperature control
to center 3osition. Adjust setting as necessary.
8
Loading ...
Loading ...
Loading ...