Loading ...
Loading ...
Loading ...
Operating Instructions
Suitable options will automatically be indicated
when the cycle is selected.
To add options, press the corresponding options
buttons to illuminate the selections desired. To delete
options, press the options buttons again and the indi-
cator lights will turn off.
To protect your fabrics, not all options are available with
every cycle. If an option is not appropriate for the cycle,
it will not be displayed. Occasionally, two options in the
same cycle will conflict with each other, like delicate heat
and sanitize. When this happens, the option selected first
will cause the conflicting option to not be selectable.
All options selected for the cycle, except sanitize and
add steam (on select models), will be remembered
and recalled each time that cycle is selected in the fu-
ture. To prevent unintentional and accidental exposure
of delicate material to sanitize heat or unexpected
steam, the sanitize option and the add steam option
(on select models) will not be remembered and must
be reselected each time.
Temperature Dryness Options
(p high
@ medium/high © max
C)medium @ normal
O low O less
,_:_ damp alert
extended tumble
add steam c_b
r. air
\J
:!@:
.....damp
ks
k.
delicate heat
sanitize
chime
J
DAMP ALERT
For loads that contain some items you plan to hang
dry, flat dry or iron, add the damp alert option to any
Auto Dry cycle. A signal will sound when the load has
reached the damp dryness level to remind you to re-
move those items to hang dry, dry flat or iron dry. Open
the door, remove those items, close the door and press
the start button to continue drying the remaining items.
EXTENDED TUMBLE
Select the extended tumble option if the dried load
might not be removed promptly at the end of the
cycle. The dry load will tumble continuously without
heat for 30 minutes. EHT. TumBLE will be displayed
and a chime will sound every 5 minutes to remind you
to remove the dried load.
The wrinkle release option (on select models) can
be selected with extended tumble to increase the
amount of time the load will tumble without heat. Use
this combination if you know it will be more than 45
minutes before you can remove the load.
Loading ...
Loading ...
Loading ...