Schumacher SC1321 6A 6V/12V Fully Automatic Battery Charger

OWNERS MANUAL - Page 6

For SC1321.

PDF File Manual, 24 pages, Read Online | Download pdf file

SC1321 photo
Loading ...
Loading ...
Loading ...
6
MAINTAINING A BATTERY
The SC1321 maintains both 6 and 12 volt
batteries, keeping them at full charge. It
can charge and maintain both small and
large batteries.
NOTE: The maintain mode technology
allows you to safely charge and maintain
a healthy battery for extended periods
of time. However, problems with the
battery, electrical problems in the
vehicle, improper connections or other
unanticipated conditions could cause
excessive current draws. As such,
occasionally monitoring your battery and
the charging process is recommended.
12. MAINTENANCE AND CARE
A minimal amount of care can keep your
battery charger working properly for years.
• Clean the clamps each time you are
nished charging. Wipe off any battery
uid that may have come in contact with
the clamps, to prevent corrosion.
• Occasionally cleaning the case of the
charger with a soft cloth will keep the
nish shiny and help prevent corrosion.
Coil the input and output cords neatly
when storing the charger. This will help
prevent accidental damage to the cords
and charger.
Store the charger unplugged from the AC
power outlet in an upright position.
Store inside, in a cool, dry place. Do not
store the clamps clipped together, on or
around metal, or clipped to the cables.
13. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
I cannot select a 6V
or 12V setting.
The charger is equipped
with Auto Voltage Detection,
which automatically detects
the voltage and charges the
battery.
No problem; this is normal.
The LED does not
light when charger is
properly connected.
AC outlet is dead.
Poor electrical connection.
Check for open fuse or circuit
breaker supplying AC outlet.
Check power cord and extension
cord for a loose tting plug.
The battery is
correctly connected,
but the LED did
not light immediately.
If the Start/Stop button is not
pressed, charging should begin
in ten minutes.
No problem; this is normal.
The battery is
properly connected,
but the LED
never lit.
The battery voltage is low. Press the Start/Stop button to start
charging.
Loading ...
Loading ...
Loading ...