Loading ...
Loading ...
Loading ...
14
Installation
Burner Adjustments
Every grill is thoroughly checked for proper lighting and burner flame pattern. Conditions at
the location may necessitate minor adjustment of the burner air intake, if the flames are not
steady/stable as shown in the figure:
The flame should be full length of
the burner, blue and stable. The
air intake should be adjusted ONLY
if the flame is lifting off of the
ports or has yellow tipping.
If flame is lifting, turn the air
shutter clockwise reducing this
intake. The screw should be
loosened before turning the air
shutter.
If the flame has yellow tipping, the
air shutter should be turned
counter clockwise allowing more
air in. This will stabilize the flame. Make sure to tighten the screw after adjustments are
made.
Remove the front panel as shown (Page 17) in the diagram to access the burner front (air
shutter).
In order to provide gas to the burner, the orifice must be inside the burner venture opening.
Check to ensure that the burner is properly secured at the front and back.
Loading ...
Loading ...
Loading ...