Loading ...
Loading ...
INTRODUCTION
Your Minibar operates silently and efficiently to keep beverages
cold. To assure proper functioning, please observe the following
recommendations:
1. To allow for proper air circulation, the unit should be kept at
least 2 cm (approx. 1 inch) away from the wall behind it.
2. Be sure the Minibar is perfectly level.
3. Locate the unit away from direct sunlight. This will save
energy and enable the unit to perform at its best.
4. Under NO circumstances should the top plastic grid be
covered. This would prevent the circulation of warm air.
When unpacking the Minibar, check that nothing is missing or
damaged. Damage in transit must be reported immediately to
the carrier.
INSTALLATION
The best refrigerating performance using the least power
consumption is achieved by placing the Minibar away from
sources of heat (e.g., oven, radiator) and out of direct sunlight.
Use a spirit level to ensure that the unit is perfectly level.
CAUTION: The Minibar is designed to stand free and not be
built into or under anything. Place the Minibar so that the
circulation of air around the absorber at the back is not
obstructed. The rear ventilation grid must always be
uncovered. The rear of the unit should be at least 2 cm
(~1 inch) clear of a wall.
Electrical Connection:
• This Minibar requires an electrical connection of 115V/60Hz
with a grounded, three-prong socket.
• The unit is equipped with a three-prong plug and is grounded
to eliminate electrical hazards. In order to make it effective,
the unit must be plugged into a grounded electrical outlet.
• Do not use an extension cord.
Loading ...
Loading ...
Loading ...