Loading ...
Loading ...
Loading ...
38
NOTES:
• The red dot next to the power level indicator will illuminate for
those zones set with a timer.
• After adjusting, the setting in timer indicator will flashing for 5
seconds and then stop flashing, then the setting be confirmed.
• The default setting of minute reminder and timer is 30 minutes.
• If more than one heating zone has a timer set, the timer indicator will
show the lowest time remaining. The red dot next to power level indicator
will flash.
• The minute reminder and timer can be used at same time. The timer
indicator shows the lowest time setting. If the lowest setting is the minute
reminder, the red dot next to timer indicator will flash. If the lowest setting
is the timer setting, the red dot of corresponding cooking zone power
level indicator will flash.
• If indicator shows the timer setting of a cooking zone and you want to
check minute reminder setting, press the timer control button , and
the indicator will show minute reminder setting.
Residual Heat Warning
Beware of hot surfaces
• When the cooktop has been operating for some time,
there will be some residual heat. The letter “H” appears in
power setting indicator to warn you to keep away from it.
Note for Knob Control Models: A hot surface indicator light will glow
when any radiant element is turned on and will remain on until the surface is
cooled to safe temperature.
Loading ...
Loading ...
Loading ...