Loading ...
Loading ...
Loading ...
7
TO SET THE TEMPERATURE:
Use the / buttons to set the desired temperature. Each time the / buttons are
pressed, the temperature will increase / decrease by 1°F (or 1°C).
When you press the button once, the temperature will increase or decrease by 1°F (or 1°C).
If you try to go beyond the minimum/maximum value that can be established, the display
will jump to the lowest/highest adjustable temperature value automatically. If a button is not
pressed for 5 seconds, the LED will stop flashing and the setting mode will be exited.
The setting temperature for wine cooler: 39°F to 64°F (or 4°C to 18°C) .
The setting temperature for beverage cooler: 2°C to 10°C
FUNCTIONS
TEMPERATURE MEMORY FUNCTION (NOT FOR MODEL
)
If the power is suddenly lost, the set temperature will be saved by the unit. Once the power is
back on, the unit will be at the same set temperature.
TEMPERATURE ALARM FUNCTION
If the interior temperature is higher than 73°F (23°C), “HI” is shown on the display panel and
the buzzer alarm sounds continuously after one hour. This indicates that the inner temperature
is too high, and you should look for the reason. If the inner temperature is lower than 32°F
(0°C), “LO” is shown on the display panel; the alarm and the malfunction indicator light go on
at the same time.
NOTES
If too many bottles are put in at once or the door has not been closed tightly, the unit will
display the "HI" signal on the display panel. This is normal. Please wait 5 minutes after closing
the door and “HI” will disappear.
It is normal that the cabinet shows “HI” or “LO” from time to time. If it occurs frequently or lasts
for a long time, you can restart the unit by unplugging it, then re-plugging after 5 minutes. If the
problem occurs again after restarting, please contact customer service.
Before reconnecting the power, wait 3 to 5 minutes. Otherwise you could damage your
appliance. If you attempt to start the appliance before the end of this time delay, the appliance
will not turn on.
(NOT FOR MODEL
)
Loading ...
Loading ...
Loading ...