Loading ...
Loading ...
Loading ...
6
Adjustments
Tilt Adjustment
Loosen the tilt levers on the head of the arm assembly enough to allow controlled adjustment. Set the desired tilt, then
re-tighten the locking levers. (Fig.11)
Once the tilt levers are locked, their position can be adjusted by pulling out on each lever and rotating it to a less
obtrusive position.
Horizontal Adjustment
Slightly loosen the two screws on the head of the arm assembly using the provided Hex key (Fig.11). Then, firmly
hold the display by two opposite corners and gently turn it into the desired position (Fig.12). When level, re-tighten
the screws.
Cable Covers
Horizontal Level
Adjustment Screws
15°
6°
Tilt Lever
(1 on each side)
Figure 11
+/- 5°
Figure 12
Lifetime Limited Warranty
SunbriteTV™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all
components found to be defective in material or workmanship under normal conditions of use. This warranty shall
not apply to products which have been abused, modified or disassembled. Products to be repaired under this
warranty must be returned to SunbriteTV or a designated service center with prior notification and an assigned return
authorization (RA) number.
Technical Support 866.838.5052
Loading ...
Loading ...