Bonsenkitchen EK8903 1.7 L Kettle, 2200 W Electric Glass Kettle

Operation Instructions - Page 4

For EK8903.

PDF File Manual, 12 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
1
IMPORTANT SAFEGUARDS TIPS
1. Read all instructions before using.
2. Before connecting the kettle to the power supply, check that the voltage
indicated on the appliance (underside the kettle & base) corresponds with the
voltage in your home. If this is not the case, contact your dealer and do not
use the kettle.
3. Do not let the cord hang over edge of table counter or touch hot surface.
4. Do not place on or near a hot gas or electric burner or in a heated oven.
5. Do not operate without water, otherwise heater element would be damaged.
6. Ensure that the kettle is used on a firm and flat surface where the children
can’t touch. This can prevent the kettle from overturning.
7. To protect against a fire, electric shock or personal injury, do not immerse cord,
electric plugs or kettle in water or other liquids.
8. While water boiling, avoid contacting with steam from the spout when water is
boiling or just after it has switched off. Do not be anxious to uncover the lid.
9. Always take care to pour boiling water slowly and carefully without tipping the
kettle too fast.
10. Be careful when opening the lid for refilling when the kettle is hot.
11. Close supervision is necessary when any appliance is used by or near children.
12. Do not touch the hot surface. Use the handle or the button only.
13. The kettle is for household use only.
14. Do not use outdoors.
15. The use of accessory attachments, which are not recommended by the
appliance manufacturer, that may result in fire, electric shock or personal injury.
16. Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts and before cleaning the appliance.
17. Always ensure the lid is closed and do not lift it while the water is boiling.
Scalding may occur if the lid is removed during the brewing cycles.
18. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
Loading ...
Loading ...
Loading ...