Loading ...
Loading ...
Loading ...
Converting to another gas type
*INSTALLATION*
59
Changing the small jets
To change the small jets, the burner
fixing screws must first be loosened
and the upper section of the appliance
removed.
Pull the control knobs off.
Remove the burner components.
Undo the screws.
Lift the top of the appliance off (see il-
lustration).
Using a small screwdriver, unscrew
the small jet in the gas fitting.
Pull out the jet with a pair of pliers.
Fit the correct jets securely (see jet
table).
Secure the jets against inadvertent
loosening with sealing wax.
Functional check
Check all gas fittings for leaks.
Reassemble the hob.
Ignite all burners to check that they
are operating correctly.
- The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
- On the highest setting, the flame
must have a distinctive and visible
core.
Adhere the label supplied with the
jets, stating the type of gas being
used.
Loading ...
Loading ...
Loading ...