Loading ...
Loading ...
Loading ...
Install Grease Cup, and Grease Bracket
[] Attach the Grease Cup Bracket to the bottom of the Grease Tray. See Inset 1.
[] Install the Grease Cup into the Grease Cup Bracket, inserting it from the front of the cabinet.
Inset 1
Inset 2
Place LP Cylinder into the Cabinet
[] Slide the LP cylinder tray out of the cabinet by pulling the tray latch up in the vertical position. Unscrew
the screw on the back of the cylinder tray. Then place the tank onto the sliding LP cylinder tray. Make
sure the front of the tank valve faces the front of the cabinet. Tighten the screw on the back of the
cylinder tray to secure the LP cylinder. Slide the LP cylinder tray back into the cabinet and lock in place
by pushing the LP cylinder tray latch down to a horizontal position. Be sure the LP cylinder is "OFF" by
turning the hand wheel clockwise until it stops. (See Inset 1)
[] Be sure all burner controls are turned to the "OFF" position. Remove the safety cap from the cylinder
valve. Center the nipple of the regulator into the cylinder and attach the regulator to the LP tank by
turning the black nut clockwise until it stops. Note: Hand Tighten Only. Do Not Use A Wrench, Do Not
Attempt To Light Your Grill At This Time. (See Inset 2)
Inset 1
Inset 2
]0
Loading ...
Loading ...
Loading ...