Kenmore Elite 79571049010 Bottom Freezer Refrigerator

Use & Care Guide - Page 34

For 79571049010. Also, The document are for others Kenmore models: 795.7104

PDF File Manual, 36 pages, Read Online | Download pdf file

79571049010 photo
Loading ...
Loading ...
Loading ...
THE REFRIGERATOR SEEMS TO MAKE TOO MUCH NOISE
Check if... Then...
The sounds may be normal for your refrigerator. Refer to the UNDERSTANDING SOUNDS YOU MAY HEAR
section on page 31.
THE ICEMAKER IS NOT PRODUCING ICE OR NOT ENOUGH ICE
Check if... Then...
New installation.
The refrigerator is not connected to a water
supply or the supply shutoff valve is not turned
on.
Reverse osmosis water filtration system is
connected to your cold water supply.
Wait 24 hours after ice maker installation for ice production to
begin. Wait 72 hours for full ice production.
Connect refrigerator to the water supply and turn water shutoff
valve fully open.
Reverse osmosis filtration systems can reduce the water
pressure below the minimum amount (20 psi) and result in
icemaker issues.
Kink in the water source line. A kink in the line can reduce water flow. Straighten the water
source line.
Large amount of ice recently has been Allow 24 hours for ice maker to produce more ice.
removed.
The icemaker is not turned on. Locate the icemaker on/off switch and confirm it is in the On (I)
position.
The temperature setting for the freezer is too Below 0°F is the recommended temperature for the freezer
warm. compartment for normal ice production. If the freezer
temperature is warmer, ice production will be affected.
The doors are opened often. If the doors of the unit are opened often, the cold air will
escape which will prevent the unit from maintaining the set
temperature. Lowering the temperature can help, as well as
not opening the doors as frequently.
The doors are not closing properly. If the doors are not properly closed, ice production will be
affected.
Ultra Ice is not selected. With this option, the cold air in the compartment is increased
as is ice production.
34
Loading ...
Loading ...