Loading ...
Loading ...
Loading ...
www.HunterFan.com
1.888.830.1326
Troubleshooting
Excessive wobbling
• Make sure the blades are
properly installed on the
blade iron posts.
• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.
• Use the provided balancing
kit and instructions to
balance the fan.
Noisy Operation
• Make sure the blades are
properly installed on the
blade iron posts.
• Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Wireless Issues
• Turning the fan on and off at the switch
can resolve some wireless issues.
• Reset the Wi-Fi module by removing
the battery door. Press and hold the
reset button for 5 seconds. The fan and
light LEDs will flash once the module
has been reset.
Fan doesn’t work
• Make sure power switch is on.
• Check the circuit breaker to
ensure the power is turned on.
• Make sure the blades spin
freely.
• Turn off power from the
circuit breaker, then loosen
the canopy and check all the
connections according to the
wiring diagram.
• Check the plug connection in
the switch housing.
Remote control of fan is erratic
• Make sure the battery is
installed correctly.
• Install a fresh battery.
Transmitter only works when
held at close range
• Change battery.
If you have multiple remotes or
multiple remote-controlled fans
installed on the same circuit
breaker and you are experiencing
interference or faulty operation of
your remote controls, please go to
www.HunterFan.com/FAQs
and click “How do I properly install
multiple remote-controlled fans?”
for information on how to correct
this issue.
20
M3653-01 • 06/07/17 • © 2017 Hunter Fan Company