Loading ...
Loading ...
Loading ...
AS YOU COMPLETE _,4, _,_
Check Brake Operation _
Check 33re Pressure
Check Operator Presence and
T Interlock Systems I_
R Ch_ for Loose Fa.lleners _ I_ If
A Sharpen/Replace Mower Blades 7
T Lubficatlon Chart I_
0 Check B_,ttery Level
R Clean Battery and Terminals
Check Transaxle Cooling
Check V-Belts
Check Engine Oil Level _ I_
Change Engine Oil (With oil rdter) li_l.2 I_
E c_nge EngineCdl(withoutoilfilter) _i"
v'
a Clean Air Filter
G Clean Air Screen
Inspect Muffler/Spark
Arrester
l/
E Replace Oil Filter (if equipped) _,_
Clean Engine _llng Fins _ ±
Replace Spark Plug I_
Replace Air Filter Paper Cartridge _=
Replace Fuel Filter _#
1 - Change nlore often when operating up,tier a heavy load o_ 3 -Re_a_e blades mo_eellen when mowing in sandy ._iil.
in hl_ ambient len'_eratures. 4 • Not required ilequippe_ withJ_ai_enal_-f_e_ balt_iy.
2 - Serv_e n_ore oftenwhen operating in d[dy or dustyconditions. 5 - T_ghtenfront axle pivot boll to 35 ft.-IbS,maximum.
DOnot overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments inthe Service and Adjust-
ments section of this manual should be
checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2, Check brake operation.
3. Check tire pressure,
4, Check operator presence and
interlock systems for proper operation.
5, Check for loose fasteners,
LUBRICATION CHART
L_ - (_ Spindle
Zerk t";-'_ Zerk
_Front Wheel
Bearing
Zerk
Bearing Zerk
General Purpose Grease
® Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the lifeof
the self-lubricating bearings. Ifyou feel
they must be lubricated, use only a dry,
powdered graphite type lubricant sparingly,
17
Loading ...
Loading ...
Loading ...