Loading ...
Loading ...
Loading ...
Basic operation en
11
Preparing the base unit
Note:The food processor shown in
the pictures may differ from your
model in terms of shape and fea-
tures.
1. Set up the base unit as described
in the main operating instructions.
2. Press the release button and raise
the swivel arm until it engages.
→Fig.
3
3. Place the bowl in the base unit.
→Fig.
4
4. Turn the bowl anticlockwise until it
engages.
→Fig.
5
5. Press the release button and push
the swivel arm down until it en-
gages in position1.
→Fig.
6
6. Press down the protective cover
for drive2 at the marking and
remove.
→Fig.
7
Assembling the continuous
feed shredder
1. Grip the disc holder level with the
wings.
→Fig.
8
The two plastic tips must point up.
2. Take hold of the required cutting
disc by the edge and fit onto the
disc holder with the side you re-
quire facing up.
‒ Fit single-sided discs with the
blades or serrations facing up.
‒ Fit reversible discs with the re-
quired marking facing up.
→Fig.
9
3. Insert the disc holder with the cut-
ting disc into the housing.
→Fig.
10
4. Place the lid on the housing.
→Fig.
11
Markings and must match
up.
5. Rotate the lid clockwise until it en-
gages.
→Fig.
12
Markings and must match
up.
Fitting continuous feed shred-
der onto the base unit
1. Place the continuous feed shred-
der on drive2 as shown.
→Fig.
13
2. Push the continuous feed shredder
down and rotate clockwise until it
engages.
→Fig.
14
The continuous feed shredder
must be securely connected to the
base unit.
Basic operation
Basic operation
Basic operation
Recommended speeds
Observe the recommended speeds
for optimum results.
Note:Your model is equipped with a
4- or 7-level rotary switch depending
on the features of the appliance. The
recommended speeds for the 4-level
rotary switch are always shown in
brackets in these instructions for use.
Setting Use
7 (4) Slicing, shredding or grating food.
¡ Reversible cutting disc, thick/
thin
¡ Fine grating disc
¡ Reversible slicing / shredding
disc
¡ Asia vegetables disc
Loading ...
Loading ...
Loading ...