Loading ...
Loading ...
Loading ...
©2017 Hestan Commercial Corporation
11
EN
CART & GRILL ASSEMBLY
(continued)
10. Remove the screws securing the control panel on the front of the grill. Carefully tilt down
the control panel being careful not to damage the wires to the switches and LED light bar.
Pull off the connectors to the 2 switches and the LED light bar at this time. Remove the
control panel from the grill and set aside.
11. Reach inside the right front area of the cart wall and install 2 flat washers and hex bolts as
shown here using a 7/16” wrench or socket wrench. Do not tighten yet. Repeat this on the
opposite side of the cart.
Loading ...
Loading ...
Loading ...