Loading ...
Loading ...
Loading ...
EXPLOSIONHAZARD
Donotuseflammablecleaners.Notfollowingthese
instructionscancausedeath,explosionorfire.
Therefrigerator,aswellasthefreezer,do theirown
de-freezing.Thisprocessdoesnotpreventthebuild
upofcontaminants,thereforeit issuggestedthatyou
cleanbothpartsoncea month;cleanspilledliquids
immediately.
REFRIGERATORCLEANING
• Unplugyourrefrigerator.
• Pullout all of the removableparts(suchas the
vegetableanddairydoors).
• Usea cleansponge(ora softrag)anduseit with
lukewarmwatermixedwithdetergent.Donot use
abrasiveorconcentratedcleaners.
• Handwashit,anddryitthoroughly.
• Plugtherefrigeratorbackin.
OUTSIDE
Waxtheoutsideinordertocreatebetterprotection.Make
sureyouusea productspecificallydesignto beused
forelectro-domesticproducts(carwaxisacceptable).
Useaclean,softrag,andperformthistasktwiceayear.
Formetal-maderefrigerators,donotwax,simplyclean
itwithwateranddetergent.Donotuseconcentratedor
abrasiveproducts.
NOTE;Avoidthe usageof chemicalproductsthat
containphosphatesorbleach.
BACK COVER
ELECTRICAL SHOCK HAZARD
Before you begin, either unplug the refrigerator or turn
off power at the circuit breaker or fuse box.
NOTE: Back Cover should only
be removed by a qualified
technician.
In order to get an efficient
performance of your refrigerator,
clean the back cover of it at least
twice a year.
REPLACING REFRIGERATOR LIGHTS
NOTE: The interior lighting for refrigerator uses LED
lighting.
DO NOT try to change any LED module. LED lighting
should only be replaced by qualified technician.
REPLACING FREEZER LIGHTS
ELECTRICAL SHOCK HAZARD
Before replacing a burned-out light bulb, either
unplug the refrigerator or turn off power at the circuit
breaker or fuse box.
NOTE: Moving the control to the OFF position does
not remove power to the light circuit.
NOTE: All refrigerators use LED lighting in freezer for
this reason must be replaced bya qualified service
technician except for model: LFX25778**, GM-B259R *
and GM-L268F**P
If your refrigerator is one of models previously mention-
ed please follow next instructions.
INSIDE (Allow freezer to slightly warm up a small
degree to prevent cloth from sticking)
In order to eliminate bad odors, clean the inside of
the refrigerator with a mixture of baking powder and
lukewarm water (one teaspoon of baking powder per cup
of water). Ensure that the powder dissolves thoroughly, in
order to prevent any sort of damage.
DOOR LINING AND GASKETS
Use only a mild detergent (such as dish soap).
1. Unplug refrigerator power cord form outlet.
2. Use a screwdriver to remove the cover screw. (Save
the cover screw)
3. Using a flat instrument, gently pry the lamp cover
loose in the front as shown. Rotate downward to
remove the rear tabs.
4. Make sure the bulb is cool to the touch. Turn the
bulb counterclockwise to remove.
5. Replace with a new 60-watt appliance bulb.
6. Insert tabs on back of cover into slots in freezer
ceiling. Push cover up to snap front into place.
7. Use a screwdriver to assemble the cover screw.
PLASTIC PARTS (Covers and Panels)
Do not use abrasive, paper or rough products. These
could damage the product.
CAUTION
DO NOT place fingers
inside of cover, lamp
may be hot.
31
Loading ...
Loading ...
Loading ...