Loading ...
Loading ...
Loading ...
To turn on the machine
Connect the propane/butane gas cartridge to the main body. Make sure is locked into position. Turn the gas supply
on by turning the valve anticlockwise, as shown in the diagram below. To start the machine, press the ignition switch
located on the left hand side of the machine. It is necessary to keep the machine on for about 10 seconds (if water
fogging) and/or 30 seconds (if oil fogging) to warm up before opening the chemical valve.
To start fogging
Once the machine has warmed to the required temperature, turn the chemical valve anticlockwise as shown in the
diagram below and press the trigger to start fogging. When the trigger is released, the fogging will pause. Note.
When oil fogging, please make sure all the oil has been consumed. Any oil still left in the coil after use could cause it
to block and not work on the next session.
To turn off the machine
Release the trigger. Turn the chemical supply valve clockwise to stop the supply of chemical. Turn off the gas supply
by turning the valve clockwise as shown on the diagram below. Remove gas cartridge. Note: When storing the
machine, please make sure no dilutant or chemicals are left in the tank.
www.plagasexpress.com