Loading ...
Loading ...
Loading ...
6
OPERATING INSTRUCTIONS
1. Always use the appliance on a dry, level
work surface.
2. Place the work bowl firmly on the housing
base. You will see on the base, there are
instructions and arrows in which show the
direction of the work bowl to be locked.
Place the work bowl with handle to your
left and turn anticlockwise.
3. Carefully lift and place the SmartPower
blade over the work-bowl centre stem until
it drops to the bottom. Firmly push to
ensure the SmartPower Blade is locked into
position.
4. Plug in the housing base and add desired
ingredients to work bowl. Ensure food is
cut into even small pieces and work bowl is
not overloaded.
5. Place the cover lid with the small locking
tab positioned to the left of the work bowl
handle. Turn anti-clockwise (toward the
handle) to lock the lid and disengage the
safety locking switch.
NOTE: The chopper blade will not operate
unless the lid is correctly locked in position.
6. Plug into wall socket and switch on.
7. Press Grind or Chop and pulse to your
desired consistency. Food will stop
processing when Chop or Grind button is
released.
8. When the SmartPower blade has stopped
moving, unplug from power outlet.
9. Remove cover and work bowl.
a. Turn work bowl cover clockwise to
remove.
b. Turn work bowl clockwise to unlock it
and lift off the base.
10. To remove liquids and sauces from bowl,
simply pour ingredients out of work bowl.
Our convenient BladeLock System keeps
the blade safely in place.
11. To remove thicker ingredients from bowl
carefully remove the SmartPower Blade by
holding the stem on the top and gently
pulling up to disengage blade lock.
Remove food with spatula or while the
bowl is still on the base.
NOTE: Never operate the Mini Prep Pro
without the ingredients in the work bowl.
CLEANING &
MAINTENANCE
• When not in use, leave unplugged.
• Keep the blade out of the reach of children.
• All parts except the housing base are
dishwasher safe and recommend washing
them in the dishwasher on the top rack only.
Due to intense water heat, washing the work
bowl and cover on the bottom rack may
cause damage over time. Insert the cover
right side up to ensure proper cleaning and
the work bowl upside down for drainage. Put
the SmartPower blade and spatula in the
cutlery basket and remember when
unloading, to CAREFULLY remove the
SmartPower blade and avoid contact with the
blades.
• To simplify cleaning, rinse the work bowl,
cover, and SmartPower Blade immediately
after use so food won't dry on them.
• If you wash the SmartPower blade by hand,
do so carefully. When handling, use the
plastic stem. Avoid leaving it in sudsy water
where they may disappear from sight. To
clean the blade, fill the work bowl with sudsy
water, hold the blade by its plastic stem and
move it rapidly up and down on the center
shaft of the bowl. Use of a spray attachment
is also effective. If necessary, use a brush.
• The work bowl is made of SAN plastic. It
should not be placed in a microwave oven.
• The housing base may be wiped clean with a
sudsy, non-abrasive cloth or sponge. Be sure
to dry it thoroughly.
• If the feet leave spots wipe the area with a
damp sponge and nonabrasive cleaning
detergent.
• Any other servicing should be performed by
an authorised service representative.
Loading ...