Loading ...
Loading ...
Loading ...
Technical Information
Models: FF511L & FF511LBI (white with solid door)
FF521BL & FF521BLBI (black with solid door)
SCR450L & SCR450LBI (white with glass door)
SCR500BL & SCR500BLBI (black with glass door)
Capacity: 4.1 cubic feet
Electrical Input: 115V AC / 60Hz
Rated Current: 1.4A
Power Input: 100W
Refrigerant: R134a, 1.75 oz
Installation: Free-standing (-L & -BL models)
Built-in (-LBI & -BLBI models)
Unit Weight: 57 lbs
Unit Dimensions: 19⅞"W x 23¼"D x 33¼"H
[For built-in models, (-BI suffix), height can be adjusted from 33¼" to 34½"]
Installation Instructions
Before Using Your Refrigerator:
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
3 wire shelves (models FF511L, FF511LBI, SCR450L & SCR450LBI)
3 glass shelves (models FF521BL, FF521BLBI, SCR500BL & SCR500BLBI)
1 crisper drawer with glass cover
1 handle with screws and handle seal
2 keys
Before connecting the unit to the power source, let it stand for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installing the Refrigerator:
Place your unit on a floor that is strong enough to support it when it is fully loaded. To
level your unit, adjust the leveling legs at the bottom.
Models FF511L, FF521BL, SCR450L and SCR500BL are designed to be free-
standing only, and should not be recessed or built in. The four models with the suffix
-BI are specifically designed to be built in.
When installing models FF511L, FF521BL, SCR450L and SCR500BL, allow 5 inches
of space between the back and sides of the unit, which will allow the proper air
circulation to cool the compressor and condenser.
When installing any of the built-in (-BI) models, allow 1” of space between the back of
the appliance and the wall. If the appliance is going to be placed against a wall, if
4
Loading ...
Loading ...
Loading ...