Loading ...
Loading ...
Loading ...
Page 29
GRILL START-UP –Lighting the Grill
Lighting Instructions
NOTE: To light gas grill with a gas lighter, make sure the grill has been leak
tested and burners be properly located. Insert long-necked gas lighter
through the cooking grid, and in through an adjacent side port hole of the
Flavorizer grid, placing near a burner side. Turn the closest burner knob on
to “HIGH” setting to release gas. Turn on the button on gas lighter, burner
should light immediately. Adjust burners to desired cooking temperature.
Open Lid/Hood
Ensure Burner Control Knobs
In the “OFF” position,
Turn on the gas supply valve
1. Push the burner knob in and slowly
rotate counter-clockwise to the high
position.
2. You will hear a loud click as the
electronic lighter produces a spark. Listen
for the sound of the gas igniting and look
for a flame through the cooking grids. If
the burner does not light on the first try,
repeat immediately.
3. If the burner does not light in 5
seconds then wait five minutes until the
gas clears before attempting to light it
again. Repeat the procedure or try the
manual lighting procedure below.
WARNING:
When Lighting the Grill, Hold the Knob in until Burner Ignites. DO NOT RELEASE KNOB, GAS WILL
CONTINUE TO FLOW.
4. Upon successful lighting, repeat the
process on the other burners you wish to
light.
5. To shut off the burners, rotate the
knob and turn to OFF.
6. It is normal to hear a popping sound
when the burners are turned off.
Loading ...