Hotpoint RA720K4CT electric range

User Manual - Page 14

For RA720K4CT.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Installation instructions
PREPARE TO INSTALL THE RANGE
MATERIALS YOU MAY NEED
(UL Approved 40 AMP)
4-Wire Cord OR 3-Wire Cord
4' Long 4' Long
Squeeze Connector
(For Conduit
Installations Only)
TOOLS YOU WILL NEED
Drill with 1/8" Bit Safety Glasses
Adjustable Wrench
Tape Measure
Pliers
Pencil
1/4" Nut Driver Level
Phillips Screwdriver
Flat-blade
Screwdriver
PARTS INCLUDED
I
Anti-Tip Bracket Kit
_-I REMOVE SHIPPING MATERIALS
Remove packaging materials. Failure to
remove packaging materials could result
in damage to the appliance.
14
_-I PREPARE THE OPENING
Allow 2" spacing from the range to adjacent
vertical walls above the cooktop surface. Allow
30" minimum clearance between the surface
units and the bottom of unprotected wood or
metal top cabinet, and 15" minimum between
the countertop and adjacent cabinet bottom.
To eliminate the risk of burns or fire when
reaching over hot surface elements, cabinet
storage space above the cooktop should be
avoided. If cabinet storage space is to be
provided above the cooktop, the risk can be
reduced by installing a range hood that
protrudes at least 5" beyond the front of the
cabinets. Cabinets installed above a cooktop
may be no deeper than 13".
From
combustible
walls above
cooking
C surface
5 either side
_ 36"
Surface
Wall Mounted ,-.......
out Jet
WaiJ
Floor
Recommended acceptaHe electrical outlet
area. Orient the electrical receptacle so
the length is parallel to the floor.
D (depth
with door
open)
Models A B C D
20" Wide 20" 20%" 2" 41"
24" Wide 24" 243/s" 2" 41"
Flooring under the range
Your range, like many other household items,
is heaw and can settle into soft floor coverings
such as cushioned vinyl or carpeting.
When moving the range on this type of
flooring, it should be installed on a 1/4"
thick sheet of plywood (or similar material)
as follows:
When the floor covering ends at the front
of the range, the area that the range will
rest on should be built up with plywood
to the same level or higher than the floor
covering. This will allow the range to be
moved for cleaning or servicing.
Loading ...
Loading ...
Loading ...