Loading ...
Loading ...
Loading ...
Filling The Water Tank
4
WARNING: Always unplug the unit before removing the Water Tank.
WARNING: DO NOT touch the water in the Base.
WARNING: NEVER ll the Water Tank from the top of the unit. Follow Water Tank
lling instructions in #4.
Remove Rotating Mist Nozzle
prior to lling the Water Tank.
Lift the Water Tank with both
hands using the Handle to
remove the humidier from
the Base.
Turn the Water Tank upside
down and remove the Tank Cap
by turning it counter clockwise.
1
2
4
3
Lift the Water Tank with both
hands using the Handle and
replace on the humidier Base.
Make sure to follow the shape
of the Water Tank and the hu-
midier Base, so that the tank
sits level and ush to the Base.
Ensure the tank is rmly seated.
5
Attach the Rotating Mist Nozzle
to the top of the Water Tank by
snapping into place for desired
use as pictured.
6
Filling the Water Tank:
Use clean, cool, tap water.
WARNING: DO NOT
use
extremely cold water, since it may
temporarily reduce the mist output.
WARNING:
NEVER ll with
hot/warm water or use additives
as this could damage the unit and
void the warranty.
WARNING:
If you have hard tap water STOP
using tap water and use ONLY
ltered, distilled, cold boiled or
bottled water.
Replace the Tank Cap by rmly
turning clockwise until tight.
Turn the Water Tank upright and
check the Tank Cap for leaks.
If any water drips, remove the
Tank Cap and retighten.
WARNING: DO NOT place
Water Tank on the humidier
Base if the cap is leaking.
7
Loading ...
Loading ...
Loading ...